NingBo Hongmin Electrical Appliance Co.,Ltd
We care about cooling and water.
Add to Cart
Floor standing water dispenser hot and cold for home use YLRS-A
Company Brief Introduction
Our company is a professional manufacturer of water dispenser, water purifier & parts. Our company integrates with designing, production and trading. With the principle of high start point, high standards, and supper quality, the company has sold its product and been well-known in domestic and oversea market.
Precautions
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. Do not make any changes or damage to the cooling system. Any changes or maintenance to the cooling system should be done by qualified organization.
4. Use drinking water only.
5. Keep the condenser free from dirt and dust.
6. Do not tilt the dispenser more than 45 degrees or you may damage the compressor.
7. The unit is equipped with a grounded plug. Do not alter or change the plug in any way.
8. Never turn on heating switch when there is no water.
9. Hot water is hot enough to cause injuries. Please keep your children away from the hot water faucet.
10. Please turn off the power switch when stopping using it..
11. For dispenser with refrigerator, please do not open the refrigerator too frequently or leave the door open. Otherwise, the water may freeze. Once water freezes, turn off the cooling switch and re-run the unit in one hour.
Parameter Table
| Model | YLRS-A | |
| Product Feature | Hot&Cold, Floor standing water dispenser with storage/fridge cabinet cold water by compressor cooling | |
| Product Specifications | SS 304 for hot&cold water tank; Water pipe connection:food grade silicon gel tubes | |
| Power Supply | AC 220V-240V~50/60Hz, or 110V/60HZ | |
| Power Consumption | Cold | 90W |
| Hot | 500W or 550W | |
| Cold | Cooling system | Compressor cooling |
| Tank type | SS tank | |
| Temp range | 6-10℃ | |
| Gas | R134A | |
| Cooling capacity | 2.0L/h | |
| Hot | Heater type | Inner heater |
| Tank type | SS tank | |
| Temp range | 85-95℃ | |
| Temp control | Bimetal thermostat | |
| Heating capacity | 5.0L/h | |
| HS CODE | 8516791000 | |
| Packing method | 5-layer carton Box | |
| Colors available | full white color | |
| Product weight | 13.0kg | |
| Product boxed weight | 14.0kg | |
| Product dimensions | 31*31*96cm | |
| Product boxed dimensions | 33*33*99cm | |
| Loading quantity | 40HQ | 660PCS |
| Lead time for MOQ | 35 days | |
Product certificates introduction
Our products have passed LVD / EMC / CE / CB / SASO certification
Our Sample policy
We will charge the sample if you want to get a sample and check the quality before you place an official order.
And the freight by Fedex or DHL is on your side. We promise to minus the sample cost from the amount of your
official order in the near future. Thanks for your understanding.
FQA
Q1: No hot or cold water
A1: Over consumption of hot or cold water in short time
Solution: Just wait a moment, then hot or cold water is available again
A2: No power supply
Solution: Connect plug to socket. Turn on heating or cooling switch
Q2: No water running out from taps
A1: Empty bottle
Solution: Replace it with another bottle.
A2: Inlet of bottle supporter blocked by bottle seal
Solution: Clean out wasted paper& bottle seal, install bottle again.
Q3: Leakage from bottle supporter
A: Broken bottle
Solution: Replace it with a new bottle
Q4: Noisy operation
A: Not placid installation
Solution: Replace the machine on placid& solid surface.
Testing picture for the goods
How to Contact us